Description
If no preowned woodworking machinery is currently being listed in the category you are searching, call Stan the Woodworking Machinery Man at 770-861-0570 to check availability of incoming inventory, as our used machinery frequently sells before being listed.
Contact: Stan, the Woodworking Machinery Man
Phone: 678-642-9722
Email: stan@WoodworkingMachineryMan.com
SOLD Used SCM Single Shaper with HSK Spindle - Model Vanguard T160
This used single shaper with an HSK spindle was manufactured by SCM Group and features 2500 x 750mm (48” X 29.5”) table dimensions.
Technical Specifications:
- 7 + Axis integrated touch screen PC control over: spindle speed height & angle fence infeed & out- feed sectioned table feeder support vert. & horiz.
- Program storage for up to 999 programs
- Liquid cooled 13.5 hp electrospindle with maximum power available starting at 3000 rpm.
- Inverter control of electrospindle with range from 900 to 10 000 rpm and electronic brake
- Pneumatic HSK B tool change system with air blower system for clean contact surfaces and safety sensors for tool change operation monitoring
- spindle rotation tool taper lock go / no-go sensor 5 HSK B 63 spindles
- 1 1/4 Inch diameter with tooling cart
- Spindle vertical movement on two precision linear guides and tilt movement on precision arch-formed dovetail trunion through recirculating ball screw drives.
- Flex profiling fence system with 205mm stroke referenced to the center of the spindle shaft with movement on two linear guides by recirculating ball screw
- Fence includes the ability to stroke behind spindle
- Spindle tilt angle from +45° to - 45° with maximum possible tool projection through angle range
- Upper mobile control panel Cope attachment with 500 mm stroke including miter gauge and clamp
- Fast: sectional table to adjust for tool diameter
- Powered cross support mount for feeder with readout Aluminum fences
- Magnetic starter with overload protection
- Low tension circuit (110v by transformer)
- Motor Horsepower: 13.5 HP
- Table Dimensions: 2500 x 750mm (48” X 29.5”)
- Table Height: 920mm ( 36" )
- Working Height of Spindle (under the nut): 140mm ( 5.5” )
- Spindle Tilting: 0 to 45 0 to -45 degrees.
- Max. Tool Diameter w/ Profile Fence: 250mm (10”)
- Max. Tool Dia. Retractable Under Table: 320mm x 75mm ( 12” x 2.9” )
- Spindle Speeds (rpm): 900 to 10 000
- Dust Outlet on Fence and Rear Base: 120 mm each
- Overall Dimensions (L W H): 98” x 29” x 41”
- Net Weight 2 185 lbs.
- Electrical Requirements 45 amps @ 230 volts
- Minimum Working Air Pressure 88 PSI
- Dust Extraction 680 CFM x 2