Description
If no preowned woodworking machinery is currently being listed in the category you are searching, call Stan the Woodworking Machinery Man at 770-861-0570 to check availability of incoming inventory, as our used machinery frequently sells before being listed.
Contact: Stan, the Woodworking Machinery Man
Phone: 678-642-9722
Email: stan@WoodworkingMachineryMan.com
SOLD - Used Brandt Automatic Edgebander – Model Optimat KD-99CF
If no preowned air compressors are currently listed, call Stan the Woodworking Machinery Man at 770-861-0570 to check availability of incoming inventory, as our used machinery frequently sells before being listed.
Contact: Stan, the Woodworking Machinery Man
Phone: 678-642-9722
Email: stan@WoodworkingMachineryMan.com
List Price: $29 500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 7243
Member Stock Number: EB020012323
Serial Number: 0-261-02-8131
Description: Used Brandt Model KD-99 CF Optimat Automatic Edge Bander - and with all related equipment.and...
- PC-16 Program Control with a passive matrix 7.4" color LCD screen
- 8 Mb IDE Flash Disc 100 MhZ 486 DX4 hard drive
- 8 Mb RAM and internal modem for remote diagnostic link
- motorized upper pressure beam for all work stations
- large coil table (800mm diameter)
- two motor (3 H.P. each) Joint Trimming Unit with cutterheads
- automatic magazine for strip and coil feeding program
- controlled pressure zone (first roller driven and four idle pressure rollers
- Quickmelt Gluing System QA-34 with large granulate hopper
- automatic glue feed system
- infrared heating unit between the glue roller and pressure zone
- End Trimming Station (two 1 H.P. motors)
- program controlled pneumatic indexing from straight to bevel
- Fine Trimming Unit #1 (two 2 H.P. motors)
- horizontal and vertical tracing wheels
- program controlled pneumatic indexing
- Fine Trimming Unit #2 (two 3/4 H.P. motors)
- horizontal and vertical tracing wheels with digital "Quickset" system and program controlled pneumatic indexing
- Contour Trimming Unit (four 1/2 H.P. motors) with program controlled indexing
- scraping unit with quick change heads and program controlled indexing
- oscillating jump buffing unit (two 1/3 H.P. motors)
- electronic frequency changer for all trimming motors and brakes
- safety and sound enclosure
- 3 H.P. feed motor delivering a feed speed of 52 F.P.M.
- electrical controls wired for operation on AC 3/60/230 volts
- 0.0016" to 205/32" edgeband thickness
- 1/2" to 2-3/8" edgeband height
- panel thickness from 5/16" to 2-3/16"